Serious house mixer doing it properly is xtc


They came about when a longtime reader, Laudan (mamalala in the comments), emailed me about her favorite cookie at a little bakery called Stacey Cakes in McCall, Idaho – a beautiful mountainous resort town a few hours from where I live.

Step one is always to calibrate the mixer however you can. You could use a test tone of 0dbVU (that's LOUD, so turn down the monitors). First, set each fader at the 0db marking on the board. When you apply the test tone, turn up the trim until the meter on each channel pegs at 0db. If you don't have a tone to use take the loudest sound that the channel does during the mix, Set the trims so that when this peak occurs, the meter pegs at 0db. Do this for every channel in the mixer. This gives you a reference. A zero dbVU signal (or your loudest signal on the track) should meter at zero db when the fader is at zero db. When you move your fader to -10 db, the meter should peg at -10db. Now you know what those numbers are for that are silk screened on your mixer! Do It!


Serious House Mixer Doing It Properly Is XTCSerious House Mixer Doing It Properly Is XTCSerious House Mixer Doing It Properly Is XTCSerious House Mixer Doing It Properly Is XTC

kcbul.cradvisors.us


 

 
 
cradvisors.us